Allstar Help, Troubleshooting, and Instructions
Also see:
3 Btn Remotes Help
,
Gate & Door Operators Help
,
Keypads Help
and
Receivers Help
Allstar garage door opener programming instructions
Allstar garage door opener
Allstar residential operators are designed and built to last longer than typical garage door openers. Allstar garage door openers pride themselves on the quality and value of our products. No other residential operator can perform year-after-year like an ALLSTAR. Their commercial operators have always been at the top of the industry's quality and performance charts and today's operators are the best they have ever made. Allstar tech support and customer service have experienced professionals standing by to help for installation. If you cannot find the right garage door remote for your needs or your specific application please call our 800 number. Allstar puts you in control with their 3 button garage door openers.Our UL listed Residential Operators include features normally found in high-priced products. Built to the same high quality standards of our commercial products, our residential gate operators will provide years of dependable service. ALLSTAR is your one-stop source for residential gate operator applications.
ALLSTAR Commercial Operators are leaders in the industry for features, performance and value. Heavy gage steel construction, high-quality weather resistant finishes, and reliable solid-state controls make our products a perfect choice for commercial applications. UL 325 and 991 listed.
After installing your receiver and transmitter, check the operation of your radio controls by moving approximately 45 feet back from the garage door, then press the transmitter button. Operation at this distance should be reliable. However, environmental conditions and the location of the transmitter and receiver will affect distance.
If the transmitter doesn?t activate the operator check the coding on both the transmitter and receiver. The code setting must match exactly .
If the distance is inadequate check the battery and replace if necessary.
To maximize the operating distance move the transmitter to different locations in the car until a satisfactory distance is achieved. Vanity mirrors on sun visors will affect performance.
If the receiver is in the proximity of a metal beam or other obstruction it may be necessary to relocate the receiver to increase the operating range.
If multiple receivers are mounted closer than 15 feet, blocking and interference may occur. Move the receivers further apart.
If system does not work at any distance, check that the receiver terminals are connected to the proper operator terminals.
If the HomeLink® transmitter does not activate the operator or distance is inadequate,verify proper operation using the hand-held transmitter. Contact your HomeLink® system provider for help with configuring the HomeLink® transmitter and to resolve distance problems when using the HomeLink® system.
Classic Quik-Code Transmitter Installation Instructions
Replacement for Models:
9921T
9931T
8822T
8832T
8833T
9921MT
9931MT
9921TK
9931TK
8832TK
9931TK6
Product Features
The Classic Quik Code Transmitter makes it Programming the Classic is done by simply: possible to operate a single or group of remotely 1. Put the transmitter in program mode.
controlled devices such as a garage door opener, 2. Select the button you wish to use.
with a single transmitter. 3. Enter your 9 digit code.
INSTRUCTIONS FOR REPLACEMENT TRANSMITTERS
Select the block of switches below that best matches the one in the transmitter or receiver that you are replacing. *The grids display an EXAMPLE using the code shown on the switches to the left.
Manufacturer?s Limited Warranty
Allstar warrants its radio controls to be free from defect in material and workmanship for a period of one (1) year from the date of purchase. To obtain service, contact your dealer.
To obtain service under this warranty the buyer must obtain authorization instructions for the return of any
goods from Allstar before returning the goods. The goods must be returned with complete identification,
with copy of proof-of-purchase, freight prepaid and in accordance with Allstar?s instructions or they will not
be accepted. In no event will Allstar be responsible for goods returned without proper authorization or
identification.
Goods returned to Allstar for warranty repair within the warranty period, which upon receipt by Allstar are
confirmed to be defective and covered by this limited warranty, will be repaired or replaced at Allstar?s sole
option, at no cost and returned pre-paid. Defective parts will be repaired or replaced with new or factory
rebuilt parts at Allstar?s sole option.
This limited warranty does not cover non-defect damage, damage caused by unreasonable use, damage
caused by improper installation or care, vandalism or lightning, fire or excessive heat, flood or other acts of
God (including, but not limited to misuse, abuse or alterations, failure to provide reasonable and necessary
maintenance), labor charges for dismantling or reinstalling a repaired or replaced unit, or replacement
batteries.
These warranties are in lieu of all other warranties, either expressed or implied. All implied warranties of
merchantability and/or fitness for a particular purpose are hereby disclaimed and excluded. Under no
circumstances shall Allstar be liable for consequential, incidental or special damages arising in connection
with the use or inability to use this product. In no event shall Allstar?s liability for breach of warranty, breach
of contract, negligence or strict liability exceed the cost of the product covered hereby. No person is
authorized to assume for Allstar any other liability in connection with the sale of this product.
This warranty gives you specific legal rights. Warranty effective after July 24, 2002.
WARNING
Unexpected door operations can cause personal injury or property damage.
This device complies with Part 15 of the FCC Rules and with RSS-210 of Industry
Canada. Operation is subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Disconnect power to operator before any installation or repair. Follow all
instructions provided by the manufacturer of your operator.
Allstar Radio Controls are compatible with HomeLink®.
Homelink® is a registered trade mark of Johnson Controls, Inc.
NOTE: The table has a row for each one of the three buttons since it is possible to set a unique code for each
button. Write the code that you matched from your transmitter or receiver in the grids below.
1. First, press and hold the +
button. The Red LED will turn on. Next,
while continuing to hold the + button,
press and hold the -button. Continue
to hold both buttons until the LED starts to
blink (approximately 5 seconds). Release
both buttons while the LED is blinking.
The LED will blink two times and then
remain on to confirm you are in
programming mode. Go to Step 2
*If the LED goes out,
start over.
1a. First, press and hold the -
button. The Red LED will turn on. Next,
while continuing to hold the -button,
press and hold the + button. Continue
to hold both buttons until the LED starts to
blink (approximately 5 seconds). Release
both buttons while the LED is blinking.
The LED will blink two times and then
remain on to confirm you are in
programming mode. Go to Step 2
*If the LED goes out,
start over.
INSTRUCTIONS FOR USE WITH AN ALLSTAR
SMART RECEIVER
When using the Allstar Classic with a Smart Receiver there is no need to
match a switch setting.
Simply make up your own unique code, enter it in the grid on page 2
and follow the instructions starting with Step 1.
When the transmitter is programmed, follow the instructions for teaching
the receiver the transmitter code.
Note: If you want to program all the buttons you can Express Code them by
selecting the + button in Step 2 and ending the 9 position code in
Step 3 with a +. This will code all three buttons in one
programming step.
IMPORTANT
The SAME CODE must be set
on both the transmitter and
receiver. The controls will not
function if the codes are
mismatched.
WARNING
Keep transmitters and remote controls
out of the reach of children.
Do not let children play with or use the
transmitter or remote controls.
Unexpected door operations can cause
personal injury or property damage.
Do not place transmitter where the buttons
can be accidentally or unintentionally
activated.
SELECT THE BUTTON YOU WISH TO USE
2. While the LED is on, press the
button you wish to use. (If your block has 8
switches press the + button, if not, press any button
you?d like to use). The LED will blink off once and
then remain on. Go to Step 3...
- ENTER YOUR 9 DIGIT CODE
3. Enter the 9-digit code from the
table pressing the buttons that correspond
with the grid above. (If your block has 8 switches
use the + button in the 9th position)
4. After the 9-digit code is entered, the
LED will blink twice to confirm a valid code
and remain off.
5. Repeat the procedure for the remaining buttons.
Go to Step 4...
Installing the Transmitter
The transmitter is
supplied with a metal
clip which may be used
to attach the unit to a
sun visor. If the clip is
used, slide it into the
recess provided on the
back of the transmitter
case until the snaps on the case fit around the clip.
Battery Replacement
The MVP Quik-Code transmitter is provided with two
factory installed 3-volt batteries which should be
replaced after two years of normal use. The transmitter
code is retained in permanent memory and will not be
lost during battery replacement. To replace the
batteries, remove the back of the case with a small
screwdriver. Carefully slip the batteries out of the
holders and replace with fresh CR2032 3-volt batteries.
The ?+? on the batteries must point away from the trasnitter.
If the transmitter is installed in a pocket in your car, circuit board. Replace the back of the cover and resume
follow all the manufacturer?s instructions. normal use.
Improper transmitter installation or use may cause intermittent operation which canresult in unexpected door operations.
Call 1-800-482-2321
View Cart