Linear Alertlink AL-1

Help, Troubleshooting, and Instructions

Linear Help, Troubleshooting, and Instructions

Home Security Help

• Interfaces to Most Nurse Call Systems.
• Adds Pendant Transmitter Capability.
• Emulates a Pull Cord Station.
• Fail-Safe Operating Mode.
• Trouble Contacts.
• Latching or Momentary Outputs.
• Accepts up to 32 DX Transmitters. All Linear DX transmitters are compatible with the Pull Cord ALERTLINK receiver; however, Linear recommends use of the DXT-21, DXT-61A, DXS-62, and the DXS-63.
• Includes Power Supply
  
  
• General Specifications
• Operating Power: 12 to 16 VAC or 12 to 16 VDC (note that a 16 VAC transformer is supplied with the unit)
• Operating Current: up to 120 mA
• Indicators: POWER ON (green); SERVICE (yellow); transmitter low battery; and ALERT (red) transmitter alarm
• Radio Format: Linear DX
• Receiver Type: superheterodyne
• Operating Frequency: 315 MHz
• Capacity: up to 32 transmitters
• Inputs: total of three - Alarm A, Alarm B, Supervisory IN
• Outputs: total of five relay outputs rated at 1 amp at 120 VAC - Alarm Output A1, Alarm Output A2, Alarm Output A3, Alarm Output B, Supervisory OUT
• Wiring Connections: color-coded wire leads
• Overall Size: 5.25 inches H x 3.625 inches W x 1.5 inches D (133 x 92 x 38 mm)
• Mounting: surface mount to wall or single-gang box
• Recommended Transmitters: DXT-21; DXT-61A; DXS-62; DXS-63 (note: all Linear DX transmitters are compatible with the Pull Cord ALERTLINK Receiver)