Home > Linear > DXT-21

Linear DXT-21

Linear DXT-21
List Price: $59.99
Buy Now: $34.50
You Save: $25.49 (42%)
Ready to buy?
Add To Cart

Available Volume Pricing:
1 - 4 $34.50
5 - 9 $33.50
10 - 24 $32.50
25+ CALL US!

Help, Troubleshooting, and Instructions
General Specifications for the: DXT-21 DXT-23 & DXT-25 models
  • Linear DXT-21 is a 2 Button 1 Channel Handheld transmitter
  • Dimensions: 4.2 in L x 1.6 in W x 0.8 in H (107 x 41 x 20 mm)
  • Power: Two 3V DL-2032 lithium batteries (supplied)
  • Current Consumption: 7 mA average while transmitting
  • Battery Life: Five years typical
  • Measured Range: 500 feet minimum in open air (four quadrant test)
  • Channels: 1, 4, or 8 channel depending upon model
  • Operating Frequency: 315 MHz

Features
  • Unique "Extra" top button allows for additional channels.
  • High visibility LED.
  • Lithium batteries supplied.
  • UP to 700 foot range.
  • Pocket/belt clip supplied on each model.

Compatible Transmitters:
  • DXT-21 is a 1 Channel --Top or front
  • DXT-23 is a 4 Channel -- top, left, right, or left and right simultaneously (fail-safe mode)
  • DXT-25 is an 8 Channel -- All individual buttons on the front of the transmitter (4 channels), plus top and then any front button gives you (4 additional channels)

  • The Model DXT-21 2-Button, 1-Channel Handheld Transmitter is a battery powered portable transmitter designed for use with Linear's DX Format receivers. Each transmitter can be used in a limitless number of wireless remote control applications. Pressing a button on the transmitter sends a digitally coded wireless signal to its companion receiver.
  • The DXT-21 is a two-button, one-code transmitter. Pressing either the round button on the transmitter's front, or the small button on the transmitter's top will send the same signal.
  • The digital DX code format features over a million possible codes. The DX transmitters are precoded at the factory to unique codes, so no field coding is required. The multi-button transmitters send variations of their preset codes depending on which buttons are pressed. Transmitters can send a signal for up to 10 seconds per activation.
  • For versatility, any transmitter code can be programmed into any receiver channel. Receivers must be programmed to the transmitter code before system testing and operation.

Campatibles by Linear

continue shopping