Specifically made for "Z Series" garage door openers
MegaCode receivers and transmitters do not contain a typical "coding switch". Each transmitter is pre-set at the factory to a unique code. The receiver is programmed by sending a signal to it from the transmitter(s) that are going to be used with it. This stores the transmitters code into the receiver's memory. The receiver will retain the memory even without power. The receiver will activate only from these "memorized" transmitters.
Features and Specifications
Activates one device.
Each MegaCode receiver can remember a maximum of 10 transmitter.
Wire lead antenna.
Receiver is powered with 24 volts AC/DC from the garage door or gate operator.
Linear Help, Troubleshooting, and Instructions
Call 1-800-482-2321
View Cart