Site Information

 Loading... Please wait...

Genie Remotes Guide

Genie garage door remotes chart

The genie remotes guide and genie chart will simplify which remotes are still available today to replace discontinued remotes from the past. Many of the old genie dip switch style remotes are replaceable by new multi function two or three button remotes. The intellicode remotes have now been updated to multi frequency genie's that can switch between 390mhz and 315mhz to accomodate the old and new intellicode or code hopping garage door openers. 

GENIE Models AT85
Carper 390
AT85P
Carper 390
MAT85
Carper 390
AT90
Stinger 390
MAT90
Carper 390
CT90
Stinger 390
LD12
Stinger 390
AT95
Carper 390
AT285
N/A
AT290
N/A
GPT90-1
Stinger 390
GPT90-3
Stinger 390
TRAC DRIVE                        
GG1950/1810       YES YES YES  YES  YES    YES  YES  YES 
GS900/920/940/975       YES YES  YES  YES  YES    YES  YES  YES 
GS810/810A/815/840       YES YES  YES  YES  YES    YES  YES  YES 
GS210/250       YES YES  YES  YES  YES    YES  YES  YES 
CHAIN DRIVE                        
SP99/SP129/SP229       YES YES YES YES YES   YES  YES  YES 
CH125/130 YES YES YES           YES YES    
LD100/500/100A/550A       YES YES  YES YES  YES    YES    YES 
LAD125/555       YES  YES  YES  YES  YES    YES    YES 
CM6000/6000A       YES  YES  YES  YES  YES    YES    YES 
CM60/70/80/60S/70S/80S       YES  YES  YES  YES  YES    YES    YES 
PMX60/70/80       YES  YES  YES  YES  YES    YES    YES 
SCREW DRIVE                        
GS980/9800/880/8800 YES  YES                     
GS820/8200/720/850/800 YES  YES                     
PRO82/98/88/90 YES  YES                     
PRO83/93       YES  YES YES  YES  YES    YES    YES 
PRO88S/98S       YES  YES  YES  YES  YES    YES    YES 
CM7500/8500/7500S/8500S       YES  YES  YES  YES  YES    YES    YES 
SD SERIES                        
9500/9000/8000/2500/5000       YES  YES  YES  YES  YES    YES    YES 
GXL/GX/G SERIES                       YES 
2500/5000/8000/9000/9500       YES  YES  YES  YES  YES    YES    YES 

 Genie 1993 and later chart

Excelerator / Intellicode/ Code Dodger 1993 to present gm3tbx.jpgGenie GM3T 

ACSCTG Type 1 GIT-1 DISCONTINUED
USE THIS REMOTE --->

geniegit-1.jpg

 gm3tbx.jpgGenie GM3T

ACSCTG Type 2 GIT-2 DISCONTINUED
USE THIS REMOTE --->

geniegit-2.jpg

 gm3tbx.jpgGenie GM3T

ACSCTG Type 3 GIT-3 DISCONTINUED
USE THIS REMOTE --->

geniegit-3.jpg

 gm3tbx.jpgGenie GM3T
GMIC-2BL intellicode 2 button keychain remote    DISCONTINUED  
GMI-3BL intellicode 3 button keychain remote      DISCONTINUED  

GCT-3 dip switch and rolling code/intellicode remote
replaced by the Genie GM3T ------>

geniegct3.jpg

 gm3tbx.jpgGenie GM3T
   

Genie Circuit Board and Sequensor Guide

Original Board # Service Number Where Used Board Function
31184R 20386R

AC Screw Drives late '95

to present

Sequensor
31181R 20393R Pro Max late '95 - '97 Sequensor

33001R/T or

34374R/T

20380R

Pro Max "B" and Chainglide

3 terminal screws

ICB
34514R /S/T 20380S Chainglide 6 terminal screws ICB
30901S 20399R Stealth '95 to present Sequensor
29061T 20424S Stealth '95 to present Rectifier
34019R 36600R Excelerator - ALL Controller
34463R 35383R

Excelerator 2000 - 2008

(Fasco Motor)

Motor Drive
36428R 36248R

Excelerator 2008 to present

(McMillan Motor)

Motor Drive
36448A 36448A 1024 ChainLift / BeltLift Controller
37028A 37028A 2024 ChainLift / BeltLift Controller
31171R / 36306R 36521R

AC Screw '95 to present

Pro Max '95 - '97

Receiver
31171R / 36306S 36521S Stealth '95 to present Receiver

The Genie remotes guide and genie chart were designed so customers could find the right garage door opener for their needs in the event theirs was lost or stolen. If you are unsure which remote you need, check and see if you have a keypad outside your home. Often times a keypad will give you enough information as to which remote opener on the genie guide & genie charts you need. If you are still stuck look at the model number on your genie and then call us for assistance. 

    There are no products in this category.