Site Information

 Loading... Please wait...

DoorKing 6300 Swing Gate

Availability:
Discontinued
Quantity:

Product Description

Doorking 6300 Swing Gate Operator for Residential, Commercial and Industrial Applications

APPLICATIONS

The 6300 series operators are designed to operate vehicular swing gates in residential, commercial and industrial applications. These operators are designed so that they can be either pad or post mounted without any costly and time consuming field modifications. You need to specify which mounting method when ordering. The unique design of these operators allows the gate arm to attached to the bottom rail of the gate. This eliminates the need for any brackets to be welded to the face of the gate and creates an aestetically pleasing installation. These operators can be equipped with a factory installed DC Convenience Open option which will automatically open the gate in the event of a power outage.

ADVANCED FEATURES

 

  • Self-adjusting, no maintenance limits.
  • Overlap feature for dual swing gate operation.
  • Designed with a built-in primary and secondary
  • entrapment prevention system.
  • Ports for plug-in loop detectors.
  • Two convenience outlets.
  • Fail-safe release.
  • Tamper detect circuit.
  • DC Powered convenience open (optional).
  • Gate tracker reporting output.
  • Programming switches.
  • Built-in reset switch.
  • Built-in power On/Off switch.

    SPECIFICATIONS

     

  • DoorKing Model 6300 with 1/2 HP Motor
  • Maximum gate width 18-feet.
  • Maximum gate weight 700 pounds*. (*Assumes gate swings level and is in good condition with properly adjusted hardware. Other external factors may affect the performance of the gate operator.)
  • Swings gate 90 degrees in approximately 15-seconds.
  • 1/2 HP continuous-duty motor.
  • 115 VAC.
  • 230 VAC.
  • 460 VAC.
  • Class I, II, III and IV applications.
  • Compliant with UL 325 and 991. ETL Listed. (Note: To be compliant with UL 325 and industry safety guidelines, additional secondary entrapment prevention devices may need to be installed with this gate opertator. Your professional DKS system installer can provide you with more details on these devices and on current industry safety standards.)
  • Dimensions (operator only): 13.25"W x 12"H* x 28"D (* Height of operator only. Actual height above ground is determined by which mounting method is used)
  • DoorKing Model 6300 with 1 HP Motor
  • Maximum gate width 22-feet.
  • Maximum gate weight 800 pounds*. (*Assumes gate swings level and is in good condition with properly adjusted hardware. Other external factors may affect the performance of the gate operator.)
  • Swings gate 90 degrees in approximately 15-seconds.
  • 1 HP continuous-duty motor.
  • 115 VAC.
  • 230 VAC.
  • 460 VAC.
  • Class I, II, III and IV applications.
  • Compliant with UL 325 and 991. ETL listed. (Note: To be compliant with UL 325 and industry safety guidelines, additional secondary entrapment prevention devices may need to be installed with this gate opertator. Your professional DKS system installer can provide you with more details on these devices and on current industry safety standards.)
  • Dimensions (operator only): 13.25"W x 12"H* x 28"D (* Height of operator only. Actual height above ground is determined by which mounting method is used) OPTIONS AVAILABLE WITH THIS OPERATOR

     

  • Master / slave connection cable (slave operator is shipped with 50-feet of cable).
  • Post or pad mount - specify which.
  • DC powered convenience open.
  • Plug-in loop detectors.
  • Heater kit for cold environments.
  • Multi-user commercial or industrial gate operator
  • Electronic, automatically adjusted limit settings (no mechanical limit switches required).
  • Mechanical and electronic inherent entrapment sensing system operable in both the open and close direction.
  • Automatic close timer is adjustable from 1 to 23 seconds.
  • Two ports for plug-in loop detectors.
  • Two 110 volt convenience outlets.
  • Built-in reset switch.
  • Gate overlap feature starts the master operator 1-2 seconds prior to the slave operator.
  • Magnetic lock output provided for direct connection of mag locks to the circuit board.
  • Tamper protect feature causes motor to run in the close direction if an attempt is made to force the gate open.
  • Gate Tracker reporting output sends gate operator data to a companion DoorKing access control system.
  • Optional Battery Back-Up drive system opens gate automatically, or on command, during power outages.
  • SPEED: 90º in approximately 14 seconds
  • Maximum gate weight 800lbs, maximum length 22 ft
  • 6000 series operators can be pad or post mounted allowing great flexibility to meet exact on-site requirements
  • Shipping: All gate operator are shipped by Motor Freight you must select the Motor Freight option when ordering gate operators. UPS does not ship gate operators

 

Product Reviews

Write Review

This product hasn't received any reviews yet. Be the first to review this product!

Find Similar Products by Category