Site Information

 Loading... Please wait...

Elite SL 3000 UL Sliding Gate Operator

$1,975.00 $1,595.00
(You save $380.00)
Availability:
Usually ships in 24 hours
Shipping:
Calculated at checkout
Quantity:

Product Description

Elite SL 3000 UL 1/2HP Sliding Gate Operator

A handling fee of $100.00 will be added due to the weight and this product MUST ship UPS Ground.

***** Shipping charges may be adjusted due to delivery destination *****

Elite SL 3000 UL model specs:

  • Max Gate Length 37 feet
  • Max Gate Weight 1000(lbs)
  • Motor 1/2 hp
  • Gate Travel 1 foot per second
  • Warranty Seven(7) years for single home use and five(5) years for commercial use
  • Shipping is $100.00 due to weight, its weighs approx 105lbs.
  • Elite SL 3000 UL is designed for high traffic applications such as heavily accessed gated communities and commercial buildings.

 

ELECTRICAL SPECIFICATIONS

  • 120 VAC Power Built-in 120 VAC power receptacle (NEMA 5-15)
  • Alarm If the gate hits an object twice while opening or closing, the system will shut down and an alarm will sound for five minutes
  • Alternate Outputs With Omni Option board, three push button command control, burglar alarm input and output.
  • QCC option available
  • Burglar Alarm With Omni Option board, interfaces with existing home alarm or alarm output
  • Digital Motor Protection Entrapment sensor shuts off the motor after it reaches the stall amp for 3 seconds, reverses direction for several inches and stops
  • Electronic Inputs Radio receiver, key switch, hold open loop, center loop, telephone entry system, computer input, fire department key switch, and 3-push-button station
  • ERD Sensor If the gate hits a vehicle while closing, it re-opens. If it hits a vehicle wile opening, it stops, reverses 4 to 6 inches, and stops again
  • Gate Traveling Time Adjusted by a precision mechanical device and electrical limit switch system
  • Integrated Loop Detectors Easy to install, modular, plug in loop detector inputs for exit loop, center loop, and hold open loop
  • Intelligent Master/Slave Precise, synchronized movement and communication between two gate operators using three wire RS-485 bi-directional technology
  • Magnetic Lock With Omni Option board, magnetic lock system is incorporated, allowing easy addition of the MG1300 locking system to the gate
  • Modular Board Uses LEDs to indicate all input and output functions of the gate operator
  • Motor Drive Solid state electronic motor drive system is incorporated into the board
  • Power Input controls power input to the board with convenient switch
  • Power Management Board includes electronic power management with over current shutdown and automatic recovery
  • Soft Stop Gate travels through the cycle at normal speed and comes to a stop slowly for more accurate gate cycle. Equipped with integrated time delay for long mechanical life expectancy
  • Spike Suppressors 20,000 Amps and near lightning protection with modular omni surge suppressor. Initial response time: 0.000000000001 seconds
  • Three Push Button Control On board gate operator control for close, stop and open
  • Timer Adjustable timer can be set from 0-60 seconds.

    MECHANICAL SPECIFICATIONS

     

  • Approval UL and ETL listed to the latest UL325 and UL991 specifications
  • Chassis Constructed with .25 inch sanded, welded, and gold zinc plated sheet metal
  • Cover High density polyethylene plastic and stainless steel for excellent heat and corrosion resistance
  • Cycles 75 cycles per hour with a 600 pound gate
  • Dimensions Length = 18in x Width = 19in x Height 25in
  • Emergency Release The gate is easily disconnected by turning the release handle. the best option is our DC-1000SL
  • Finish All metal parts are gold zinc plated for rust proof protection
  • Gate Length 37 feet maximum gate length
  • Motor 1/2 hp, instant reversing, 120VAC, 4 amp, 1625 rpm, with high speed ball bearings
  • Output Shaft 1 inch cold rolled steel
  • Travel Speed 12 inches per second average gate speed
  • Warranty Seven(7) years for single home use and five(5) years for commercial use
  • Weight Capacity 1000 pounds maximum gate weight
  • Worm Gear Reduction 30-to-1 worm gear reduction in an oil bath

Product Reviews

Write Review

This product hasn't received any reviews yet. Be the first to review this product!

Find Similar Products by Category