Site Information

 Loading... Please wait...

Linear DXR-702 2 channel receiver

$110.00 $74.95
(You save $35.05)
Availability:
Usually ships in 24 hours
Quantity:

Product Description

DISCONTINUED

Linear DXR-702 2 channel receiver

Features & Specifications

  • 32 transmitter capacity.
  • RF activity indicator.
  • Quick-learn programming.
  • Form "C" relay contact.
  • Low-battery sensing DXR-702

General Specifications

  • Operating Frequency: 315 MHz
  • Data Format: DX format
  • Number of Codes: 1,048,575
  • Channels: two channels
  • Measured Range: 700 feet in one quadrant with DXT-21 transmitter; 500 feet in open air (four quadrant test)
  • Operating Temperature: 32° to 140° F (0° to 60° C)
  • Sensitivity: -95 dBm (typical)
  • Number of Stored Transmitter Codes: 32 per receiver
  • Receiver Output: For "C" relay contact, 1 amp, at 32 VDC per channel
  • Field Selectable Receiver Output Modes: Momentary, four seconds (factory set)
  • Momentary, one second
  • Flip-flop toggle
  • latch, 2-Channel
  • MODE BUTTON (one per channel)
  • Learn Mode: Press and release to enter learn mode
  • Transmitters
  • Learned: Press and hold for five seconds after the last LED flash to delete all transmitters on an associated channel
  • Erase Memory: Press and hold for five seconds after the last LED flash to delete all
  • transmitters on an associated channel
  • Clear Latch: Press and release
  • Clear Low
  • Battery: Press and release mode switch on channel 2 (DXR-702 only) to clear low battery
  • LED INDICATOR
  • Steady: Indicates "learn" mode
  • Flashing: Indicates number of transmitters learned on the selected channel
  • RF Activity: Blinks synchronously with detected RF activity
  • Antenna: F-connector with antenna (supplied)
  • Input Impedance: 75 Ohm - 2:1 VSWR
  • Operating Voltage: 11 to 17.5 VDC
  • 12 to 16 VAC
  • Current: 25 mA at standby at 12 VDC
  • 90 mA in alarm at 12 VDC
  • Connectors: Screw terminal,+,-, with N/O, N/C, and common per receiver channel
  • Dimensions: 5.5 in L x 1.25 in W x 4 in H (140 x 32 x 102 mm), excluding antenna
  • Accessories: Mounting bracket, screws, and anchors (supplied)
  • Regulatory Requirements: FCC and DOC

Product Reviews

Write Review

This product hasn't received any reviews yet. Be the first to review this product!

Find Similar Products by Category